3d专家预测最准确最新汇总_今日3d字谜3d一句定三码诗天中图_3d今晚最稳一注_3d小胆神独胆今天_3d预测最准的专家,福彩3D独胆明日推荐_福家老三3d推荐号_三地杀码_3d今晚专家预测_今晚3d专家推荐号码是多少 ,陈华今晚独胆特别关注_3D独胆高手精准预测最新_3d三天计划投资计划_3d和值振幅走势图彩经网_十拿九稳十大专家预测汇总最新一期 ,3d谜语今天字谜今天的3d字谜是什么?_3d藏机图正版藏机图汇总天齐网_今日3d杀码最新_福彩3D独胆本期必中_3d的专家预测

The feed pump of the internal water inlet drum filter is a device that pumps the material liquid to the storage tank. It uses a motor to drive a special-shaped impeller to continuously send the material liquid to the filter through the pipeline.
Before starting the feed pump, check the lubrication point of the lubrication point, the tightening of the bolts and the wear of the impeller. Check the concentricity of the coupling and the sealing packing. Whether the waterproof measures of the junction box are well. After the above inspection is normal, check the forward and reverse rotation of the electric motor (clockwise is forward and counterclockwise is reverse). After checking, turn on the feed pump power. Observe the operation of the mud pump. Observe whether there is a phenomenon that cables and hoses are entangled with the pump body, whether there is abnormal noise or vibration, if there is any above, stop and check. The pump body is perpendicular to the water surface under working conditions, and the hose should not be too long in the water. Since the pump body is an ordinary casting and is not resistant to acid and alkali corrosion, the pH value of the sewage should be controlled between 6-9 during use, and the feed pump should be used under strong acid and alkali. After use, lift the pump body out of the water to check whether the pump is abnormal.